CPE210 Reset Default

FIRST METHOD: USING THE TP-LINK WEB INTERFACE

• Firstly, launch a browser on the connected PC and type http://192.168.0.254 in its address bar.
• Next, log in with the TP-link CPE210 admin details such as username and password.
• After you log in to the tp link cpe210 setup page, look for System Tools.
• Now, click on the Factory Reset option to reset your TP-Link CPE device.
• Once done, perform the TP-Link cpe210 repeater setup process again.

SECOND METHOD: VIA A RESET BUTTON

• In this method, you need to locate the reset button on the CPE210.
• Then press the reset button located in a tiny pinhole using a paperclip.
• Make sure your CPE210 is powered on during the hard reset.
• Now, press and hold the button with a paperclip for about 5-10 seconds.
• Afterward, release the button when the System LED light starts to blink.
• All the settings of the TP-Link outdoor CPE will restore to the factory defaults.
• Now, you have to perform the TPlink CPE configuration and setup process again.

THE 30-30-30 RESET METHOD

If the above methods don’t work for you, try to perform the 30-30-30 reset as follows:

• First, turn on the TP-Link CPE210 and locate the reset button on the product.
• Now, press and hold the reset button on the CPE device for 30 seconds using a paperclip.
• Next, unplug the CPE210 from the power source while holding the reset button for 30 seconds.
• Keep holding the reset button for 30 seconds, plug in your tp link CPE210 and turn it on.
• This method will definitely resolve the TP-Link CPE issues.